Copper Continuous Casting Machine, Horizontal Continuous Casting
Rod diameter: 10-300mm
Rod length: ≥1000mm
Strand quantity: 1-4
Materials: Copper alloys, copper-nickel, dhp copper, etc.
Production capacity: 20,000ton/year
Operators needed: 1-2 per shift
2. Equipment composition
This machine consists of combined melting-holding furnace (or
separate melting and holding furnace), crystallizer, water cooling
system, withdrawal system, online sawing unit, a saw for mould
changing, hydraulic furnace tilting system and electric control
The melting furnace and holding furnace can either be combined into
one unit or separate from each other, depending on the material to
Combined furnaces: It will use jet flow type inductors. In order to
control the composition of the melt, a graphite plug and a channel
made of silicon carbide will be installed between the two furnace
chambers to prevent the melt from losing heat and absorbing the
air. So the product quality will be stabilized and enhanced. The
metal loss and energy consumption will be reduced.
Separate furnaces: Between the melting furnace and holding furnace,
there is a launder, through which the molten metal flows from the
melting furnace into the holding furnace.